|
|
|
|
|
|
|
Precision 28000 Signal Conditioning Wizard
 |
|
The Precision 28000 Signal Conditioning Wizard
offers a host of filter types and options for the most demanding
filter applications. Our specs and features are the finest
available on the market.
Choose Elliptic, Time Delay, Bessel
or Butterworth filters in 4, 6, or 8 poles – up to 130 dB per
octave and cutoffs from 0.1 Hz to 127.5 kHz. Cascade a High-Pass
filter with a Low-Pass filter to form a Band-Pass filter. Control
up to 128 channels of filters conditioning in one 7" chassis or
use multiple chassis to manage over 1000 channels. Programmable
gain to over 4,000 with 0.05% resolution. Powerful Graphical User
Interface for easy system setup and control. Built-in self-test
that is NIST traceable verifies 27000 filter system performance.
And if you need special conditioning for your mix of transducers,
no worry, the 28000 Signal Conditioning Wizard provides a wide
range of signal conditioners to meet your needs. You get what
you’d expect from Precision Filters – highest performance and
flexibility that is easy to use and integrate as a key component
in your measurement system.
-
Choose from 4, 6, or 8-pole filters with cutoffs available from
0.1 Hz to 127.5 kHz.
-
Low-Pass, High-Pass
or Band-Pass
-
Up to 130 dB per
Octave attenuation slopes
-
Better than 0.5?and
0.05 dB amplitude match, DC to Fc.
-
Integrated amplifier
for gain of over 4000 with 0.05% resolution.
-
Highest performance
verified by built-in test system that is NIST traceable.
-
Fully programmable.
-
Up to 128 channels
in 7-inch rack mountable chassis
-
Selectable current
source for ICP accelerometers.
-
Powerful Graphical
User Interface (GUI) to manage hundreds of channels with Wizards
to compute proper gain, gain distribution and filter cutoff
frequency.
-
Expand later with
charge, strain, voltage, thermocouples, RTD, potentiometer,
current, frequency conditioners all in one system.
-
Buy what you need
now…add and change later as needs change.
|
|
|
|
|
|
|
|
|
|
Precision Filters
System 6000
 |
|
Precision Filters System 6000
integrates up to 64 programmable in one chassis. Cutoffs from DC
to 2 MHz and rolloffs as sharp as 130 dB per octave. End-to-end
calibration and diagnostics. Easy system setup from the front
panel or from your remote computer. System Friendly provides a
fully integrated solution to your special voltage conditioning
requirements with filters and other standard of-the-shelf hardware
that may be easily upgraded and expanded as your needs change.
-
Up to 130 dB per rolloffs – Low-Pass,
High-Pass, Band-Pass or Notch. Q’s of over 10,000.
-
Cutoffs from 0.1 Hz to over 2 MHz available.
-
64 Channels in a single 7" chassis
-
Mix filters, amplifiers, frequency-band
translators, switch matrices and other conditioners all in one
system.
-
Conditioning for voltage inputs and
ICP?transducers.
-
End-to-end calibration and diagnostics
-
Plug and Play configuration – No software to
write!
-
Upgrade and expand as needs change
|
|
|
|
|
|
