|
|
|
|
|
|
|
Precision 28000 Signal Conditioning Wizard
 |
|
The Precision 28000 Signal Conditioning Wizard
offers a host of filter types and options for the most demanding
filter applications. Our specs and features are the finest
available on the market.
Choose Elliptic, Time Delay, Bessel
or Butterworth filters in 4, 6, or 8 poles – up to 130 dB per
octave and cutoffs from 0.1 Hz to 127.5 kHz. Cascade a High-Pass
filter with a Low-Pass filter to form a Band-Pass filter. Control
up to 128 channels of filters conditioning in one 7" chassis or
use multiple chassis to manage over 1000 channels. Programmable
gain to over 4,000 with 0.05% resolution. Powerful Graphical User
Interface for easy system setup and control. Built-in self-test
that is NIST traceable verifies 28000 filter system performance.
And if you need special conditioning for your mix of transducers,
no worry, the 27000 Signal Conditioning Wizard provides a wide
range of signal conditioners to meet your needs. You get what
you’d expect from Precision Filters – highest performance and
flexibility that is easy to use and integrate as a key component
in your measurement system.
|
|
|
|
|
•
Choose from 4, 6, or 8-pole filters with cutoffs available from
0.1 Hz to
127.5 kHz.
• Low-Pass, High-Pass
or Band-Pass
• Up to 130 dB per
Octave attenuation slopes
• Better than 0.5?and
0.05 dB amplitude match, DC to Fc.
• Integrated amplifier
for gain of over 4000 with 0.05% resolution.
• Highest performance
verified by built-in test system that is NIST
traceable.
• Fully programmable.
• Up to 128 channels
in 7-inch rack mountable chassis
• Selectable current
source for ICP accelerometers.
• Powerful Graphical
User Interface (GUI) to manage hundreds of
channels with Wizards
to compute proper gain, gain distribution and
filter cutoff frequency.
• Expand later with
charge, strain, voltage, thermocouples, RTD,
potentiometer, current, frequency conditioners all in one system.
• Buy what you need
now…add and change later as needs change.
Two mainframes are
available for the 28000 system. For larger channel count
configurations, the 28016-M3 provides sixteen slots for signal
conditioner cards. The smaller form factor of the 28008B-M3
8-slot chassis makes it more suitable for lower channel count
systems or systems where portability is important.
All 28000 mainframes accept
field replaceable, low-noise AC or DC power supplies to provide
clean power to the signal conditioner cards. Binding posts at the
rear panel are provided for connecting circuit and chassis
grounds. Internal monitoring and reporting of system power supply
levels is supported by the 28000 system architecture. To protect
your investment, system temperature monitoring is provided and an
audible alarm is sounded should
the internal chassis temperature exceed factory limits or should a
cooling fan operate out of spec. |
|
 |
|
|
 |
|
|
 |
|
|
|
|
|
Precision Filters
System 6000
 |
|
Precision Filters System 6000
integrates up to 64 programmable in one chassis. Cutoffs from DC
to 2 MHz and rolloffs as sharp as 130 dB per octave. End-to-end
calibration and diagnostics. Easy system setup from the front
panel or from your remote computer. System Friendly provides a
fully integrated solution to your special voltage conditioning
requirements with filters and other standard of-the-shelf hardware
that may be easily upgraded and expanded as your needs change.
-
Up to 130 dB per rolloffs – Low-Pass,
High-Pass, Band-Pass or Notch. Q’s of over 10,000.
-
Cutoffs from 0.1 Hz to over 2 MHz available.
-
64 Channels in a single 7" chassis
-
Mix filters, amplifiers, frequency-band
translators, switch matrices and other conditioners all in one
system.
-
Conditioning for voltage inputs and
ICP transducers.
-
End-to-end calibration and diagnostics
-
Plug and Play configuration – No software to
write!
-
Upgrade and expand as needs change
|
|
|
|
|
|
|
